Component Lifecycle

DDR4 EOL Dates by Maker: Who Still Ships DDR4 in November 2026

DDR4 EOL Dates by Maker: Who Still Ships DDR4 in November 2026

Samsung, Micron and SK hynix all announced DDR4 end of life in 2025, but only Micron kept its original date: its mainstream DDR4 shipments were scheduled to end in Q1 2026, and no reversal has been reported. Samsung and SK hynix changed course in September 2025 and, according to Korean press reports, extended DDR4 production through 2026. China's largest DRAM maker, CXMT, said it would stop DDR4 in 2025. As of November 2026, new DDR4 comes from three places: the Samsung and SK hynix extensions, which are reported to run to the end of 2026, Micron's long-life industrial and automotive programme, and the Taiwanese makers Nanya and Winbond, which added DDR4 capacity instead of cutting it.

The price did not follow the usual end-of-life curve either. On 3 November 2026 the mainstream 8Gb DDR4 chip (1Gx8, 3200 MT/s) averaged US$46.82 on the spot market, and TrendForce reports that spot prices were still above the makers' own contract quotes. This guide gives the date per maker, what each date means for an order placed this month, and which DDR4 lines on a European BOM to secure first.

DDR4 EOL dates by maker: the original plan and what changed

Micron is the only one of the three big makers that has kept its original DDR4 exit date. The original dates come from a July 2025 TrendForce summary of the exit timeline. The September 2025 extensions were first reported by Korea's Maeil Business Newspaper. The makers sent these dates to customers instead of publishing them, so treat every row below as a planning date and get it confirmed in writing by your franchised channel.

Maker Original EOL plan (reported mid-2025) What changed What it means for an order in November 2026
Samsung (K4A parts) Last orders June 2025, last shipments mid-December 2025 Production extended through 2026 (reported September 2025) Extension output is the last volume. Plan for nothing new after December 2026 unless Samsung's channel confirms otherwise.
SK hynix (H5AN parts) Last orders October 2025, last shipments April 2026 Extended through 2026, with more DDR4 from its older Wuxi fabs Same end-2026 cliff as Samsung. Long-term contract customers keep priority.
Micron (MT40A parts) EOL notices June 2025, final mainstream shipments Q1 2026 No reversal reported Commercial-grade volume parts are gone. Industrial (IT) and automotive (AT) grades continue for long-life programmes, under allocation.
CXMT Halt of DDR4 in 2025 to move to DDR5 No reversal reported Not a fallback for EU industrial buyers. Any CXMT DDR4 offered now comes from existing inventory, so check date codes.
Nanya (NT5AD parts) No exit Reported plan to raise DDR4 capacity by 50%. Fab 5A (about 60,000 wafers per month) moved to 1B/1C nodes The main volume alternative. Ask about allocation for new accounts before you design it in.
Winbond No exit New 8Gb DDR4 lines. Kaohsiung fab moving from 25 nm to 20 nm at 15,000 wafers per month Good fit for 8Gb industrial designs. Check that the density and organisation you need is actually offered.

The table only adds up to a shortage when you look at capacity. Analysts quoted by TrendForce in September 2025 expected global DDR4 capacity in Q4 2026 to be 25 to 33 percent of its Q1 2025 level. The Nanya and Winbond additions soften that drop, but they do not replace it.

Why DDR4 did not get cheaper after its EOL

DDR4 got more expensive because the wafers that made it moved to HBM for AI servers. HBM production uses about three times as many wafers as standard DRAM, according to the Maeil report TrendForce cited. In 2025 DDR4 even cost more than DDR5, which is a rare reversal between two DRAM generations. In November 2026 the market is stuck. The 8Gb spot average moved from US$46.86 on 28 October to US$46.82 on 3 November, a 0.09 percent dip. Buyers are holding back because spot sits above contract, and trading volume is shrinking. Contract prices are still rising: TrendForce forecasts conventional DRAM contract prices up 10 to 15 percent quarter on quarter in Q4 2026. The wider picture across DDR5, NAND and HBM is in our 2026 memory shortage analysis.

The rule we give buyers is simple. While spot sits above contract, use the spot market to fill short gaps of a few weeks' production. Put anything larger through a scheduled order at a quoted price. A spot premium on a 12-month last-time buy is the most expensive way to own DDR4.

Which DDR4 parts disappear first: four buyer situations

Not every DDR4 line on a BOM is equally exposed. The deciding factors are the temperature grade, whether you buy chips or modules, and whether the design could move at all.

1. Commercial-temperature chips on a volume die

These go first. Commercial grade (0 to 95 °C) parts such as Micron MT40A1G8SA-062E:R (8Gb, x8, 78-ball) were the PC-volume products that the EOL notices targeted. TrendForce notes that industrial control, networking, TV and controller customers rank behind PC and server buyers when makers allocate DDR4. A mid-size machine builder in Baden-Württemberg ordering 2,000 pieces a quarter is therefore last in line at the moment when the last wafers are allocated. Size the last-time buy now. Our last-time-buy strategy guide shows how to turn forecast, scrap rate and service obligations into a quantity.

2. Industrial and automotive grades

These last longest, but on the maker's terms. Micron said in 2025 that it would keep supplying long-lifecycle automotive, industrial and defence customers. That is why parts such as MT40A1G16TB-062E IT:F (16Gb, x16, -40 to 95 °C) are still in the channel. Expect non-cancellable orders, higher minimum quantities and lead times quoted in months. These parts also work as a supply strategy, as the worked example below shows.

3. Modules: UDIMM, SODIMM and RDIMM

The module label stays the same while the chips underneath change. Module makers fit whichever die they can buy, so a consumer DDR4 SODIMM bought in 2026 can carry a different maker's chips than the batch you qualified in 2024. For industrial boards, buy modules with a locked bill of materials and a die-change notification clause. Otherwise, specify the chip itself.

4. Designs that could move to DDR5

DDR5 is not a drop-in replacement. It uses a different pinout, a 1.1 V supply and, on DIMMs, on-module power management, so moving means a new processor or FPGA memory controller and a new layout. That makes it a redesign decision, not a sourcing one. If the product will still ship in 2029, start the redesign now and buy only enough DDR4 to bridge the gap. Our DDR3 last-time-buy guide shows the same bridge-or-redesign calculation for the previous generation.

Worked example: replacing a Micron MT40A512M16LY-062E:E line

A commercial-grade line has two realistic replacements before the supply runs out: a temperature-grade upgrade on the same die, or the same organisation from a long-life supplier. The example uses parts in our catalogue. The BOM line is Micron MT40A512M16LY-062E:E: 8Gb, 512M x 16, 96-ball FBGA, DDR4-3200 (the -062E speed code means a 0.625 ns clock period), 0 to 95 °C.

  • Option A, temperature-grade upgrade: MT40A512M16LY-062E AT:E has the same base part, speed and die revision (E), rated -40 to 105 °C. The electrical interface and timing are the same, so the board does not change. The cost is a higher unit price and the automotive programme's ordering terms. The benefit is that the part sits in the supply stream Micron intends to keep running.
  • Option B, same organisation from another listing: MT40A512M16TD-062E:R is listed under Alliance Memory, with the description "DRAM DDR4 (MICRON), 8Gb, 512M x 16". It has the same density, width, ball count and 3200 speed grade, but a different package code (TD instead of LY) and die revision (R instead of E). Alliance Memory specialises in long-life legacy memory, which is why it is a credible source after EOL. A different package code can mean a different body size on the same 96-ball pattern, so check the package drawing against your keep-out before anything else. The new revision also needs a validation run (see below).

For an industrial customer with a 7-year service obligation, Option A wins unless the automotive-grade premium multiplied by the lifetime quantity costs more than a board requalification. Option B suits consumer-lifetime products, where a short validation run is cheaper than a lifetime buy at automotive prices.

The gotcha: a matching part number is not a matching die

Two DDR4 parts with the same density, width and ball count can still behave differently, because a new die revision can change timing and termination details. In a Micron part number, the two letters after the organisation (LY, TB, TD) are the package code and the letter after the colon is the die revision. Moving from :E to :F, or from one package code to another, is a change to verify, not a paperwork detail. Most processor memory controllers retrain at boot and absorb the difference. FPGA designs with fixed memory timing tables, and boards that passed signal-integrity margins only narrowly, may not. Run the replacement on a golden board through a full memory test across temperature before you commit the last-time-buy money. Our part number suffix decoder covers how to read the rest of the code.

The second half of the gotcha is counterfeits. With spot prices around US$47 per chip, relabelling a commercial-grade die as an industrial grade pays well, and the marking change is easy to miss at goods-in. For any DDR4 bought outside the franchised channel, ask for the date codes and lot traceability up front, and apply the inspection steps in our counterfeit avoidance guide.

Your DDR4 plan for the next 90 days

The reported Samsung and SK hynix extensions end in about six weeks, so the work falls before the end of Q1 2027:

  1. By mid-December 2026: list every DDR4 line by maker, part number, temperature grade and die revision. Flag commercial-grade Samsung, SK hynix and Micron parts as urgent.
  2. By the end of December 2026: ask your franchised channel for written confirmation of any Samsung or SK hynix supply after December 2026. No written answer means you treat the line as end-of-life. Our PCN and EOL notice guide explains what a valid notice contains.
  3. January 2027: decide per line between a temperature-grade upgrade, a Nanya, Winbond or Alliance Memory alternative with a validation run, or a sized last-time buy.
  4. By the end of Q1 2027: place the orders. Specify the date code range and die revision on the purchase order, not just the part number.

Send us the DDR4 lines from your BOM, with part numbers, quantities and the temperature grade you have qualified. GlobX will come back within 24 hours with what we can source, the die revision on offer and the date codes, from our base in Germany. You can also browse the full DRAM category.

Frequently Asked Questions

Is DDR4 still worth it in 2026 for a new design?

Only when the processor or FPGA you are locked into supports nothing newer. A product that will still ship after 2028 should be designed on DDR5 or LPDDR5 now. A new DDR4 design today starts life on allocation, paying spot prices near US$47 per 8Gb chip, with Nanya, Winbond and long-life industrial grades as the only growing sources.

What is the difference between commercial and industrial DDR4?

The temperature rating and screening. Commercial DDR4 is rated 0 to 95 degrees C case temperature, industrial (IT) -40 to 95 degrees C, and automotive (AT) -40 to 105 degrees C with AEC-Q100 qualification. Above 85 degrees C every grade needs double the refresh rate, so check that the memory controller supports extended-temperature refresh before relying on the upper limit.

Is LPDDR4 affected by the DDR4 end of life?

Yes. TrendForce reported in July 2025 that the three big makers were announcing EOL plans for mobile LPDDR4X alongside PC and server DDR4. LPDDR4 is not pin-compatible with DDR4, so it is not an escape route. An embedded board or module built on LPDDR4 needs its own last-time-buy review on the same timetable.

Does DDR4 ECC memory go end of life too?

Yes, because ECC is a module feature, not a separate chip family. An ECC UDIMM or RDIMM adds one extra x8 chip, or two x4 chips, per rank to store check bits, using the same DDR4 dies. ECC modules therefore follow the same chip EOL dates, although server RDIMMs get supply priority over desktop and industrial modules.

Is DDR4 RAM still worth anything if I have surplus stock?

Yes, far more than in 2024, when an 8Gb DDR4 chip cost a few dollars. Factory-sealed chips in original reels with traceable date codes sell well while spot prices sit near US$47 per 8Gb part. Loose, reworked or mixed-lot parts fetch much less. Get written offers from at least two buyers before you sell.

Need these parts? GlobX can help

GlobX is an independent distributor for electronic component sourcing in Europe - we locate hard-to-find, obsolete and allocated parts through a verified global network, with ISO 9001 anti-counterfeit inspection, full traceability and 24-hour quotes.

Related posts

Obsoleszenzmanagement-Plan: Vorlage mit 7 Bausteinen und Risikowert-Formel
Component Lifecycle

Obsoleszenzmanagement-Plan: Vorlage mit 7 Bausteinen und Risikowert-Formel

10 Nov 2026
Last Time Buy berechnen: Formel, Rechenbeispiel und 4 LTB-Fristen bis Januar 2027
Component Lifecycle

Last Time Buy berechnen: Formel, Rechenbeispiel und 4 LTB-Fristen bis Januar 2027

06 Nov 2026
Diodes PCN-2838 EOL: BS170P, BS250P, ZVN4206A, Last Order 6 Jan 2027
Component Lifecycle

Diodes PCN-2838 EOL: BS170P, BS250P, ZVN4206A, Last Order 6 Jan 2027

02 Nov 2026